How one manufacturer with over two decades of experience delivers precision automotive stamping dies, stamped parts, checking fixtures, and welding solutions under one roof.
In automotive manufacturing, the gap between a design concept and a production-ready component can be wide and costly. Engineers face the challenge of sourcing tooling from one supplier, stamped parts from another, and inspection fixtures from yet a third — each handoff introducing risk, delay, and communication overhead. The most efficient way to close that gap is to work with a partner that controls the entire production chain, from die design to final assembly.
Progressive die stamping has long been the backbone of high-volume automotive parts manufacturing. But when a supplier can also design and build the dies, produce the stamped components, deliver precision checking fixtures, and provide custom welding jigs, the result is a streamlined workflow that saves time, reduces cost, and improves quality. This is the model that LINHAI DIAN MOULD CO., LTD — operating as Dian Stamping Company — has refined over more than 20 years of serving the global automotive industry.
A Manufacturing Facility Built for Scale
Located in Huangyan, Taizhou, Zhejiang Province, Dian Stamping operates a modern facility covering approximately 50,000 m², with a dedicated die workshop of 4,000 m². The company is currently expanding into a new 35,000 m² facility featuring advanced press lines and coating capabilities. With around 110 employees — including approximately 35 die designers and technicians — the company produces an annual capacity of about 2,000 sets of medium and small stamping dies and reports an annual die turnover of approximately RMB 50 million.
50,000 m²
Total Facility Area
2,000+
Die Sets per Year
20+
Years of Industry Experience
35
Die Designers & Technicians
Comprehensive Stamping Die Solutions
The foundation of any stamped part is the die that shapes it. Dian Stamping designs and manufactures a full spectrum of stamping dies to meet the diverse requirements of automotive OEMs and Tier suppliers. The company's die portfolio includes:
- Progressive Dies — Multi-station dies that perform blanking, forming, punching, coining, and cutoff in a single pass, ideal for high-volume production of complex parts.
- Transfer Dies — Designed for large and medium-sized parts that require multiple forming operations, with individual workpieces transferred between stations.
- Tandem Dies — Engineered for car body structural components made from high-tensile materials, enabling sequential forming across multiple press lines.
The design process leverages advanced CAD/CAM software including AutoCAD, SolidWorks, and CATIA, ensuring that every die is optimized for manufacturability, longevity, and consistent output. Whether the customer provides 2D drawings, 3D data, or physical samples, the engineering team can develop a custom tooling solution from concept to tryout.
Precision Sheet Metal Parts and Fabrication
Beyond die manufacturing, Dian Stamping operates a full metal stamping and fabrication shop capable of handling projects from prototyping through high-volume production. The company serves multiple industries, including automotive, household appliances, and general industrial applications.
In-house capabilities include laser cutting, bending, welding, powder coating, and custom sheet metal fabrication. This breadth of services means that a single inquiry can yield a complete solution — from the stamping die that forms the part to the finished, coated component ready for assembly. The company processes a wide range of materials, including multiphase steel, aluminum, custom rolled and welded plate, and stainless steel, giving engineers the flexibility to choose the optimal material for each application.
Quality Assurance Through Precision Checking Fixtures
In automotive manufacturing, dimensional accuracy is non-negotiable. A component that deviates by even a fraction of a millimeter can cause assembly issues, noise, vibration, or premature failure. This is where the checking fixture plays a critical role.
Dian Stamping designs and builds high-precision checking fixtures that conform to GD&T (Geometric Dimensioning and Tolerancing) standards. These fixtures enable rapid, repeatable dimensional verification of stamped components and assemblies, ensuring that every part meets the specifications defined in the engineering data. A key advantage of sourcing both the stamping die and the checking fixture from the same manufacturer is that they are delivered as a matched set — the fixture is designed around the exact geometry produced by the die, eliminating the alignment issues that can arise when tooling and inspection equipment come from different suppliers.
Welding Jigs and Assembly Fixtures
The production of automotive components rarely ends at the stamping press. Many parts require welding, sub-assembly, or final assembly before they are ready for vehicle integration. Dian Stamping provides custom welding jigs and assembly fixtures that support robotic MIG welding, spot welding, and manual welding techniques.
These jigs are designed to hold components in precise alignment during welding, ensuring consistent weld quality and repeatable geometry across production runs. The integration of welding fixture design with die and checking fixture engineering means that the entire production tooling ecosystem is harmonized from the start.
Application-Specific Expertise
Dian Stamping's components are found across a wide range of automotive systems, reflecting the company's deep understanding of application-specific requirements:
- Body-in-White Systems — Structural stampings and assemblies for vehicle body frames
- Door Systems — Inner and outer panels, reinforcements, and hinge reinforcements
- Seating Systems — Seat frames, rails, brackets, and adjuster components
- Instrument Panels — Dashboard support structures and cross-car beams
- Chassis Systems — Suspension components, control arms, and subframe brackets
- Exhaust and Fuel Tank Systems — Heat shields, brackets, tank shells, and mounting hardware
- Clutch Systems — Housings, levers, and actuator brackets
Why Vertical Integration Matters
The most compelling reason to choose a vertically integrated stamping partner is accountability. When a single company is responsible for die design, die manufacturing, part production, inspection fixturing, and welding tooling, there is no room for finger-pointing when challenges arise. The engineering teams work in concert, the data flows seamlessly from design to production to quality control, and the customer receives a single point of contact for the entire project.
Key advantages of the vertical integration model:
• Faster time to market — Die design, stamping, and fixture development run in parallel rather than sequentially across separate companies.
• Lower total cost — Eliminating multiple supplier markups and reducing logistics overhead.
• Consistent quality — GD&T-compliant checking fixtures are matched to the actual die geometry, not a theoretical model.
• Simplified communication — One engineering team, one set of specifications, one point of accountability.
The company's quality management system is certified to ISO 9001 and follows IATF 16949-oriented practices, reflecting a commitment to the rigorous standards required by global automotive OEMs. Dian Stamping currently serves customers including KIA, BYD, Toyota, Honda, Suzuki, and Geely, and exports to more than 10 countries worldwide.
Rapid Delivery and Flexible Prototyping
Time is a critical factor in automotive development programs. Dian Stamping offers prototype services to help customers validate designs before committing to full production tooling. Typical delivery timelines are 30 to 40 days for steel stamping dies and approximately 70 days for casting stamping dies, subject to project complexity and requirements. Free metal samples are available upon request, with freight paid by the customer, allowing potential partners to evaluate quality firsthand.
Conclusion: A Partner for the Long Haul
The automotive industry is evolving rapidly, with new materials, tighter tolerances, and faster program timelines placing greater demands on the supply chain. Manufacturers that can offer end-to-end capabilities — from automotive stamping dies to finished welded assemblies — are better positioned to help their customers succeed in this environment.
Dian Stamping's combination of experienced design engineering, in-house die manufacturing, precision stamping, checking fixture fabrication, and welding jig production creates a seamless workflow that reduces risk, accelerates delivery, and delivers consistent quality. For automotive OEMs and Tier suppliers looking for a partner that can manage the complexity of metal component production from start to finish, Dian Stamping offers a proven solution backed by two decades of industry experience.
Ready to streamline your automotive stamping supply chain?
Contact Dian Stamping today to discuss your project requirements. Whether you need a custom progressive die, a production run of stamped parts, a precision checking fixture, or a complete turnkey solution, their engineering team is ready to help.
✉ Email: rita@xuhuimould.com | xh-mould@163.com
☎ Phone: +86 13325865358 | +86 13282622227